YakAttack CellBlok Kayak Battery Box
This updated CellBlok version features an injection-molded construction compared to the original model. The material change has resulted in a 25% weight reduction, with increased cable wrap size to accommodate the larger wires used in today's fish finders. The YakAttack CellBlok is the answer to a versatile and simplistic way to add a fish finder to your kayak. This kayak battery box can be easily mounted and removed from a kayak, providing a quick and easy way to put a fish finder on different yaks. Take it ice fishing as a depth finder, on your boat, or a second kayak! This is the best kayak battery box that you can buy for fish finders!
The Fully Loaded - SwitchBlade and 10 Ah Battery combo provides a simple and efficient solution for adding a fish finder to your kayak. It is equipped with everything you need: a CellBlok, SwitchBlade Transducer Deployment Arm, and 10Ah Lithium-Ion Battery Kit. All you need is the appropriate YakAttack Fish Finder Mount for your unit and you're all set for quick and easy installtion of your fish finder. The included water-resistant, rechargeable 12-volt 10Ah Lithium-Ion Battery is everything you need to charge your fish finder all day. The Fully Loaded Combo allows anglers to easily install and power their fish finder from kayak to kayak, day in and day out.
Fully Loaded Kit Includes:
- 12V 10Ah Lithium-Ion Battery wrapped in a ballistic nylon sleeve
- Charger
- Heat Shrink Marine Grade Butt Connectors
- 6" heat shrink tubing
- CellBlok
- SwitchBlade Transducer Deployment Arm
Key features and benefits:
- Use it as a depth finder for ice fishing or mount it on your boat for a fish finder
- Easily fits a 7.2Ah or 9Ah battery inside the compartment
- No need to drill any holes in your kayak!
- Composed of very durable composite materials with a lightweight design
- Constructed with UV Resistant High-Density Polyethylene
- Available in Black, Orange, or Battleship Grey
Specifications:
- Product Weight: 1.4 LBS
- Interior Space - 6.375" x 4.25" x 2.60"
- Exterior Dimensions - 10.25" x 6.75" x 3.50"
- Requires at least 10.5" of GearTrac
- Includes unassembled CellBlok, assembly instructions, (2) track mount knobs, and necessary hardware
- Battery, GearTrac, mounts, and transducer deployment arm are not included.
This is perfect for those colder months because you won't need to use a scupper hole for your transducer, so you can plug them all up and stay dry! It can be combined with the YakAttack Transducer Mount to give you a clean way to mount everything needed for your fishfinder. To remove the battery box, just loosen the two knobs near the track and slide the box off of the existing GearTrac. Slide the box onto the new kayak's GearTrac and tighten the bolts. Depending on your preferences, you can mount the battery box on either the left or right side of the kayak.
Installation Instructions:
Drill the pre-marked holes to install the Ram balls to the top of the box. You may need to make a notch in the side of the box (preferably where the side touches the sliding door) to insert the power and sonar cables inside the box and connect them to the battery. Once the fish finder and transducer arm have been attached, wrap up the excess cable and zip-tie the cables to hold them in place. It's that easy!
Warning: Do not make the notch too large. Water can then get inside the box, wetting the battery.